Polyethylene terephthalate (PET): what it is and what it is used for.
Polyethylene terephthalate, known by its acronym PET, is a thermoplastic polymer belonging to the polyester family, very different in composition from other plastic families such as polyolefins. It is obtained through the chemical reaction between terephthalic acid and ethylene glycol and is, by far, the most widely used material in the manufacture of bottles and beverage containers worldwide.
Chemical structure and composition of PET
PET is produced through a polycondensation process, in which terephthalic acid reacts with ethylene glycol, forming ester bonds that give rise to a linear polymer chain, with the molecular formula C₁₀H₈O₄. This molecular architecture, combined with a high degree of crystallinity, is responsible for many of the mechanical and optical properties that characterize this material.
Unlike polyethylene or polypropylene, which are polyolefins obtained from a single monomer, PET belongs to the polyester group, synthesized from two different compounds. Its resin identification code is number 1, the first of the 7 types of plastic that exist on the market.

Amorphous PET (APET) and crystalline PET (CPET)
Depending on the cooling rate applied after production, PET can solidify into two forms with different properties. Amorphous PET (APET) is obtained through rapid cooling, which prevents the molecular chains from becoming ordered: the result is a transparent material with good impact resistance, which is used in bottles and containers where it is important to see the contents.
Crystalline PET (CPET), on the other hand, is obtained through controlled cooling that allows the chains to organize into a more ordered structure. It loses transparency but gains thermal resistance, making it suitable for trays that go directly into the oven or microwave, an application where APET would not withstand the heat without deforming.
Properties of PET
Within the range of plastic properties, PET stands out for an unusual combination of lightness and strength. Its density is around 1.38 g/cm³, higher than that of polyolefins (0.89–0.97 g/cm³), which, together with its high crystallinity, explains its notable mechanical strength and good dimensional stability when exposed to heat.
Other relevant properties include its transparency and gloss, which make it ideal for containers where it is necessary to see the contents; an effective barrier against CO₂ and other gases, which is key to preserving carbonation in beverages and freshness in packaged foods; and low moisture absorption, which favors its use in the manufacture of textile fibers. In terms of thermal behavior, PET melts at around 250–260°C and has a glass transition temperature of approximately 70–80°C, the point at which the material changes from a rigid state to a softer one, a relevant factor when designing containers that will come into contact with hot liquids.
Like most petroleum-derived plastics, PET is not biodegradable: its high crystallinity and the aromatic nature of its molecules also make it particularly resistant to natural degradation.
Examples and uses of PET
The best-known example of PET is undoubtedly water and carbonated beverage bottles: its transparency, lightness, and barrier against CO₂ make it the material of choice compared with alternatives such as glass, with a much lower transportation cost. In food packaging, it is also used in trays and tubs for fresh and ready-to-eat products, including CPET versions suitable for oven use.
In the textile sector, PET is the basis of a large proportion of polyester fibers used in sportswear, upholstery, carpets, and industrial geotextiles used in civil engineering. In technical and industrial applications, it is used in insulating films for electrical capacitors, magnetic tapes and, to a lesser extent, automotive components that take advantage of its rigidity and low weight. In the home and consumer sector, it is also found in cosmetic and personal care product containers, where its transparency makes it possible to display the product without the need for additional labeling.
PET and its recycling
Identification code number 1 not only distinguishes PET from other plastics, but also facilitates its separation at sorting plants, making this material one of the most widely recycled materials worldwide. The general process follows the same stages as for other plastics: collection, sorting, washing, shredding, and transformation into flakes or recycled pellets (rPET).
This is precisely a topic that deserves its own space: in our article on how polyethylene terephthalate is recycled and reused we explain the entire process in detail, from collection to applications for recycled PET.
One of the particular features of rPET, compared with other recycled plastics, is that it retains sufficient properties to be used again to manufacture bottles suitable for food contact (with the appropriate treatments) or to be directly converted into polyester fiber for textiles, a second life that has driven much of the current demand for this recycled material.
Frequently asked questions
Is PET a plastic or a polyester?
It is both: PET is a thermoplastic plastic that, due to its chemical composition, specifically belongs to the polyester family, unlike other common plastics such as polyethylene or polypropylene.
What is the density of polyethylene terephthalate?
Its density is approximately 1.38 g/cm³, significantly higher than that of other common plastics such as polyethylene or polypropylene.
Is PET biodegradable?
No, PET is not biodegradable. Its high crystallinity and the aromatic nature of its molecules make it particularly resistant to natural decomposition, although it is widely recyclable.
What does it mean that PET has recycling code number 1?
It indicates that it is the first plastic within the standard classification of the 7 types of plastic and facilitates its correct identification and separation during the recycling process.
How does PET differ from polyethylene, despite having similar names?
Despite the similarity in their names, they are different materials: PET is a polyester obtained from two monomers, while polyethylene is a polyolefin obtained from a single monomer, ethylene.
A technical plastic with more than 35 years of experience at SINTAC
A PET bottle and a piece of sportswear may seem like completely different products, but they share the same chemical origin and, often, quite literally, the same material: a significant proportion of the recycled polyester fiber used in textiles today comes from bottles that once contained water or soft drinks.
At SINTAC Recycling, we have more than 35 years of experience in recycled thermoplastic materials, including PET (polyethylene terephthalate). We develop and supply rPET for industrial applications, with a wide range of grades, colors, specifications, and formats, adapted to the requirements of each processing method and application.













